- The BASO series of passive bass reflex cabinets are crafted out of high-quality 15 mm plywood and finished with a structured coating. Their elegant design enables them to be placed in any environment.
- The BASO10 is fitted with a 10” high-performance woofer with a power rating of 225 Watts RMS and 450 Watts maximum. The four layer 1.5” voice coil in combination with an over-sized ferrite magnet provides a high force factor. This, in combination with the low-loss suspension, results in a linear behaviour with high efficiency and extremely wide frequency range.
- The highly-efficient design results in a sensitivity of 96 dB with capability of continuous sound pressure production up to 120 dB. The frequency response ranges from 54 Hz up to 1.2 kHz while going down to 38 Hz at -10 dB.
- Connections are made using two SpeakON compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.
|Speaker type||10” Bass reflex cabinet|
|Max. Power||450 W|
|RMS Power||225 W|
|Sensitivity (1W/1m)||96 dB|
|Sound Pressure (Max. W/1m)||120 dB|
|Bass reflex tuning frequency||50 Hz|
|Connectors||2 x Speakon compatible connectors (linkthrough) on recessed metal plate|
|Drivers||10” cone driver with low-loss suspension, ferrite magnet and 1.5” 4-layer voice coil|
|Frequency Response||54 Hz – 1.2 kHz (±3 dB)
38 Hz – 2 kHz (-10 dB)
|Dimensions||320 x 380 x 380 mm (W x H x D)|
|Operating temperature||-20 °C ~ 60 °C|
|Construction||15 mm plywood with structured coating|
|Front finish||Steel grill (18 gauge)|
|Colours||Black (RAL9004) (BASO10/B)|
|White (RAL9003) (BASO10/W)|
|Mounting & handling||Rigging points||3 x M6 mounting bracket installation holes on both sides|
|Accessories||Optional||MBK101 wall bracket|