Skip to content

Subwoofer, Passive | Audac BASO10/B

රු 92,900.00

Audac BASO10/B 10″, 225W, 8 ohm Passive Subwoofer (black)

Warranty: 1 year carry-in for online purchases | 2 years on-site if installed by Audissey as part of a complete solution

In stock

Brand:Audac
SKU: BASO10/B Category:

Key Features

  • The BASO series of passive bass reflex cabinets are crafted out of high-quality 15 mm plywood and finished with a structured coating. Their elegant design enables them to be placed in any environment.
  • The BASO10 is fitted with a 10” high-performance woofer with a power rating of 225 Watts RMS and 450 Watts maximum. The four layer 1.5” voice coil in combination with an over-sized ferrite magnet provides a high force factor. This, in combination with the low-loss suspension, results in a linear behaviour with high efficiency and extremely wide frequency range.
  • The highly-efficient design results in a sensitivity of 96 dB with capability of continuous sound pressure production up to 120 dB. The frequency response ranges from 54 Hz up to 1.2 kHz while going down to 38 Hz at -10 dB.
  • Connections are made using two SpeakON compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.

Specifications

Speaker type 10” Bass reflex cabinet
Max. Power 450 W
RMS Power 225 W
Impedance 8 Ω
Sensitivity (1W/1m) 96 dB
Sound Pressure (Max. W/1m) 120 dB
Bass reflex tuning frequency 50 Hz
Connectors 2 x Speakon compatible connectors (linkthrough) on recessed metal plate
Drivers 10” cone driver with low-loss suspension, ferrite magnet and 1.5” 4-layer voice coil
Frequency Response 54 Hz – 1.2 kHz (±3 dB)
38 Hz – 2 kHz (-10 dB)
Dimensions 320 x 380 x 380 mm (W x H x D)
Weight 10 kg
Operating temperature -20 °C ~ 60 °C
Construction 15 mm plywood with structured coating
Front finish Steel grill (18 gauge)
Colours Black (RAL9004) (BASO10/B)
White (RAL9003) (BASO10/W)
Mounting & handling Rigging points 3 x M6 mounting bracket installation holes on both sides
Accessories Optional MBK101 wall bracket

Documentation