AV Receiver, 11.2-Channel | Yamaha RX-A8A

Yamaha’s flagship AVR with 11 channels of amplification and 150 W per channel (20Hz-20kHz, 2 channels driven in to 8 ohms, 0.06% THD)

Warranty: 1 year carry-in for online purchases | 2 years on-site if installed by Audissey as part of a complete solution

SKU: RX-A8A Category: Home Cinema AV Receivers

Key Features

4K120 and 8K60 HDMI and HDR10+ (with future update) with HDCP 2.3 and eARC (7 in/3 out)
Dolby Atmos® with Dolby Atmos Height Virtualization and DTS:X® with CINEMA DSP HD3
ESS SABRE ES9007S Premier Audio DAC for high performance digital to analogue conversion
YPAO™- R.S.C. with 3D, multipoint measurement, precision EQ and low frequency mode
Surround:AI™ technology automatically optimizes the sound and effects in real-time
ALLM, VRR, QFT, QMS (with future update) and Dolby Vision™, Hybrid-Log Gamma and BT.2020
Wi-Fi, Bluetooth®, MusicCast multi-room audio, AirPlay 2 and Spotify Connect
Voice control with Amazon Alexa, Siri® (via AirPlay 2) and Google Assistant
Pandora®, Spotify, Napster, SiriusXM, TIDAL, Deezer, Qobuz, Amazon Music HD
3rd-party control driver-capable, easy IP set-up and remote IP control
Phono input
Zone-2 with HDMI

Amplifier
Number of Amplifier Channels	11
Power Output per Channel (1-Channel Driven)	185 W at 8 Ohms / 1 kHz / 0.9% THD 200 W at 6 Ohms / 1 kHz / 0.9% THD 230 W at 4 Ohms / 1 kHz / 0.9% THD
Power Output per Channel (2-Channels Driven)	150 W at 8 Ohms / 20 Hz to 20 kHz / 0.06% THD 165 W at 8 Ohms / 1 kHz / 0.9% THD
Frequency Response	10 Hz to 100 kHz +0/-3 dB (Direct, Pure Mode)
Speaker Impedance	4 to 8 Ohms
Tone Control	Bass: ±6.0 dB (50 Hz) Treble: ±6.0 dB (20 kHz)
Damping Factor	> 140

Audio Processing
DTS Compatibility	DTS, DTS 96/24, DTS-HD High Resolution, DTS-HD Master Audio, DTS:X
Dolby Compatibility	Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
Auro 3D Support	No
Upmixing Technology	DTS Neural:X, Dolby Atmos Height Virtualization Technology
Supported File Formats	11.2 MHz DSD, 2.8 MHz DSD, 5.6 MHz DSD, AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
DAC	384 kHz / 32-Bit (ESS SABRE ES9026PRO)

Video
HDR Compatibility	HDR10, Dolby Vision, Hybrid Log Gamma
Pass-Through Support	4K60p
Upscaling	None
GUI	Yes

Wired Connectivity
Rear A/V Inputs	7 x HDMI 2.1 1 x 3RCA Component 2 x RCA Composite 3 x Optical TOSLINK 2 x Digital Coaxial 1 x Stereo XLR 5 x Stereo RCA 1 x Stereo RCA (Phono) with Ground Screw
Rear A/V Outputs	3 x HDMI 2.1 1 x Stereo XLR Pre-Out 1 x 11-Channel RCA Pre-Out 1 x Stereo RCA Zone 2 1 x Stereo RCA Zone 3 2 x RCA Subwoofer
Front I/O	1 x USB Type-A 1 x 1/4″ / 6.35 mm Headphone Output 1 x 1/8″ / 3.5 mm Setup Mic Input
Other Rear I/O	1 x FM Antenna Terminal Input 1 x AM Antenna Terminal Input 2 x Bluetooth/Wi-Fi Antenna Terminal 2 x 1/8″ / 3.5 mm (12 V Trigger) Output 1 x 1/8″ / 3.5 mm (Remote) Input 1 x 1/8″ / 3.5 mm (Remote) Output 1 x RJ45 (Ethernet)
Speaker Connectors	13 x Binding Post Pairs
HDCP Support	Version 2.3
Audio Return Channel (ARC)	ARC, eARC
HDMI CEC	Yes
Bi-Amp Capability	Yes
Input Impedance	Phono: 47 Kilohms RCA: 47 Kilohms XLR: 200 Kilohms
Input Sensitivity	Phono: 4.5 mV RCA: 250 mV XLR (Attenuator Off): 260 mV XLR (Attenuator On): 520 mV
Rated Output / Impedance	Pre-Out, Subwoofer Pre-Out: 1 V / 470 Ohms Zone 2 Line-Out, Zone 3 Line-Out: 470 mV / 470 Ohms Analog: 2 V / 470 Ohms
Signal to Noise Ratio	Phono: 95 dB (Direct Mode / IHF-A) Pre-Amp: 110 dB (Direct Mode / IHF-A)

General
AC Input Power	230V AC, 50 Hz
Power Consumption	Active: 600 W Network Standby: 3 W CEC Standby: 1.9 W Bluetooth Standby: 1.7 W Standby: 0.4 W
Dimensions (W x H x D)	17.1 x 7.6 x 18.8″ / 43.5 x 19.2 x 47.7 cm 17.1 x 10.7 x 18.8″ / 43.5 x 27.1 x 47.7 cm (Antenna Up)
Weight	47.2 lb / 21.4 kg
Box Dimensions (LxWxH)	21.88 x 21.75 x 11.5″
Package Weight	53.5 lb