Inverter, Sine Wave, 1100VA, 12V | Luminous Eco Volt Neo
Pure sine wave inverter with inbuilt battery charger and auto changeover. Output rated at 1100 VA. Requires one 12 V lead-acid battery to be connected externally.
This inverter converts 12V DC to 220V or 230V AC. It can be used in standalone mode with appliances plugged directly in to it, or it can be hardwired to the electrical distribution board of a home or small office. One 12 volt lead-acid battery needs to be connected externally to the unit.
When the mains voltage at the input of the unit is within the range 180 ~ 260 V, the connected load will be supplied with power directly from the mains and the connected batteries will be charged automatically. If mains voltage falls below 180 volts or rises above 260 volts, the unit will switch automatically to inverter mode, and will use the energy stored in the batteries to provide clean sine wave power at a stable voltage.
When mains power is restored to normal, the unit will switch back to battery charging mode and the load will again receive power directly from the mains. No manual intervention is needed.
|Output Waveform||Sine Wave|
|Output Voltage||220/230 V AC (switchable)|
|Output Frequency||50 Hz|
|Rated Capacity||1100 VA / 924 W|
|Battery Requirement||One 12 Volt lead-acid battery (not included)|
|Supported Battery Types||Flat Plate / Tubular / Sealed Maintenance Free|
|Supported Battery Capacity||80 ~ 200 Ah|
|Charging Current||Selectable in 3 steps to suit battery capacity|
|Mains Input||3-core double-insulated captive cable (1 metre long)|
|Output||3-pin universal socket|
|Battery||Red and black captive leads with factory attached lugs (each 0.75 metres long)|
|Cooling System||DC fan ×1|
|Dimensions||355×275×140 mm (W×D×H)|
|Net Weight||10.3 kg|
What’s in the Box
- 1100 VA inverter with inbuilt battery charger
- User manual
Please note that using a cable with electrical plugs fitted at both ends to connect the output of the inverter to a wall outlet in the premises, is highly dangerous and definitely not recommended. If it is required to feed the output of the inverter to multiple areas of the premises, it is advisable get a competent electrician to wire it directly to the electrical distribution board.